T Shirt Printing and Embroidery
Screen printing, digital printing, transfers and embroidery happen inside the same production as the t shirt itself. You approve the decoration on a finished sample, and the whole run is printed or stitched to match it, piece after piece.

- Printing
- Screen, digital, DTF transfer and sublimation
- Inks
- Plastisol, water based, discharge, puff and metallic
- Embroidery
- Flat, 3D puff and appliqué
- Positions
- Front, back, sleeves, neck and hem
- Proof
- Decorated sample in 14 days
- Made in
- Istanbul, Türkiye
Which decoration method suits your design?
The artwork, the fabric and the quantity point to the right method. Many t shirts combine two, such as a screen printed front and an embroidered sleeve.
| Method | How it works | Best for | Feel and wear |
|---|---|---|---|
| Screen printing | Ink is pushed through a fine mesh screen, one screen per color, then heat cured | Bold artwork in solid colors and larger runs | A crisp layer of ink that lasts as long as the tee |
| Water based and discharge | The ink soaks into the cotton or bleaches the dye and replaces it with color | Vintage looks and soft prints on dark cotton | Almost no feel on the hand, breathes with the fabric |
| Digital printing | An inkjet head prints the design straight onto the cotton | Photos, gradients and artwork with many colors | Soft, with the ink sitting in the fibers |
| DTF transfer | The design is printed on film, coated with adhesive and heat pressed on | Small logos, names, numbers and fine detail on most fabrics | A smooth, flexible film on the surface |
| Sublimation | Dye turns to gas under heat and bonds with polyester fibers | All over patterns on white or light polyester | No feel at all, the color is part of the fabric |
| Embroidery | Thread is stitched into the fabric from a digitized file | Chest logos, polos, uniforms and premium tees | Raised, textured and very hard wearing |
| Puff and special inks | Additives make the ink rise, shine or feel rubbery after curing | Streetwear graphics that need texture | Raised, metallic, glossy or soft touch |
Which t shirt printing method should you choose?
All seven are carried out in the same production that makes the t shirt, so one sample proves the fabric, the fit and the decoration together.
Should you choose screen printing or digital printing?
Choose screen printing when the design has a limited number of solid colors and the same artwork goes on many t shirts. Each color needs a screen, so there is a setup cost per design, but after that every print is fast, vivid and extremely durable. It is the standard for brand graphics, merch and company logos in volume.
Choose digital printing when the artwork is a photograph, a painting or anything with gradients and dozens of colors, or when each design runs in smaller numbers. There are no screens to make, so changing the design costs nothing extra, and the result is soft to the touch. It works best on cotton and on light garment colors.
When neither fits, a transfer often does. DTF transfers handle fine detail, names and numbers on cotton, blends and polyester, which is why they are used for personalized team shirts and small logos. Read more on how screen printing works and on DTF printing. Whatever the artwork, we choose the method that gives the best result at the best price and prove it on a sample before a single tee is printed in bulk.
Which embroidery styles work on a t shirt?
Jersey stretches, so embroidery on a tee needs a stabilizer behind the design and a stitch density that keeps the fabric flat. Done that way, it holds its shape wash after wash.
- Flat embroidery
- The classic stitched logo, ideal for a left chest, a sleeve or the back of the neck.
- 3D puff embroidery
- Stitches over a foam layer for a raised, sculpted logo, best on heavier jersey and pique.
- Appliqué
- A piece of fabric is stitched onto the tee, which gives large letters and shapes with fewer stitches.
- Tonal embroidery
- Thread dyed close to the garment color for a quiet, premium mark.
- Mixed decoration
- Embroidery combined with a printed graphic on the same t shirt, approved together on one sample.

Where can a print or embroidery go on a t shirt?
These are the usual positions and roughly how large the artwork runs. Sizes are agreed for your design and your size range.
| Position | Typical use | Usual size |
|---|---|---|
| Front center | Main graphics, slogans and large logos | About 25 to 30 cm wide on adult sizes |
| Left chest | Company logos, small brand marks and embroidery | About 8 to 10 cm wide |
| Full back | Event lists, team names and large artwork | About 25 to 30 cm wide |
| Upper back and neck | Small logos, web addresses and brand details | About 5 to 10 cm wide |
| Sleeve | Logos, flags and sponsor marks | About 5 to 9 cm wide |
| Inside neck | Printed size and care label on tagless tees | About 5 to 8 cm wide |
| All over | Patterns that run across seams, mostly on polyester | The whole garment |
Where should a print go on a t shirt, and how big?
How are all over print t shirts made?
How is decoration quality checked?
A print that looks right on day one also has to survive washing, stretching and drying. These checks run on every order.
Artwork and separations
Files are checked for resolution and color, then separated into screens or digitized for embroidery.
Strike off on your fabric
The design is printed or stitched on the actual t shirt you ordered, never on a stand in.
Wash and rub tests
Samples are washed and rubbed to check that the print does not crack, fade or bleed.
Curing control
Oven temperature and time are set for the ink and the fabric, so the print bonds fully.
Inline inspection
Prints are checked for position, color and coverage while the run is going.
Final check
Finished pieces are compared with the approved sample before packing.
What do buyers ask about printing and embroidery?
Which is better, screen printing or digital printing?
Neither is better in every case. Screen printing wins for solid colors, durability and larger runs of one design. Digital printing wins for photos, gradients and many colors in shorter runs. We recommend the method after seeing your artwork.
What is DTF printing?
DTF stands for direct to film. The design is printed on a film, coated with an adhesive powder and heat pressed onto the t shirt. It handles fine detail and works on cotton, blends and polyester. See what DTF printing is.
Can you embroider on a t shirt?
Yes. We back the area with a stabilizer, keep the stitch density suited to jersey and choose the right needle, so the logo stays flat and the fabric does not pucker.
How long does a screen print last on a t shirt?
A properly cured plastisol or water based print lasts as long as the t shirt itself when it is washed inside out and not ironed directly on the print.
Can you print all over a t shirt?
Yes. All over designs are usually made by sublimation on white or light polyester, or by printing the fabric panels before the t shirt is sewn.
What is puff print?
Puff print uses an ink with an additive that expands under heat, so the design rises from the fabric with a soft, raised texture. It suits bold streetwear graphics.
Do you print bulk orders for agencies and other brands?
Yes. Bulk t shirt printing for brands, agencies, distributors and companies is a large part of our work, and the designs stay confidential. See custom printed t shirts in bulk.
Are you a t shirt print shop?
We are more than a print shop. We knit, sew, print and embroider in one production, so a print order can include the garment itself, made to your fabric and fit, rather than only decorating ready made blanks.
Can I order t shirt printing online?
Yes. Send your artwork, sizes and quantities by email or through the quote form. We return a proof and a quote, make a finished sample and print the order after approval, with door to door delivery worldwide.
Do you print t shirts for UK brands?
Yes. T shirt printing for UK brands is shipped from Istanbul with short transit. Goods that meet the origin rules enter the UK with zero customs duty with proof of origin, and VAT applies.
Can t shirt printing be cheap at volume?
Yes. Screen printing setup is shared across the order, so the cost per printed tee falls quickly with quantity. Fewer ink colors and standard print positions keep printed t shirts affordable.
Which printing guides should you read next?
Tell us about the t shirts you want to make
A few lines are enough to start. Attach a tech pack, artwork or photos of a reference tee if you have them.
- We reply by email with questions or a written quotation.
- Your first sample is cut, sewn and decorated in 14 days once the details are fixed.
- Bulk fabric is cut only after you approve that sample.
