T Shirt Manufacturing Glossary
Factory quotations, tech packs and shipping papers use a vocabulary of their own. This glossary explains the words you will meet when you have t shirts and polo shirts made, in plain English, with a link to a fuller guide wherever there is one.
- 1
- Fabric and fiber
- 2
- Fit and pattern
- 3
- Parts and trims
- 4
- Sewing and construction
- 5
- Printing and decoration
- 6
- Dyeing and finishing
- 7
- Quality and testing
- 8
- Ordering and production
- 9
- Shipping and customs
- 10
- Certification
Which term do you want to look up?
All terms on this page from A to Z. Select a term to go straight to its definition.
What do the fabric and fiber words mean?
These words describe what a t shirt is made of. They appear on every quotation, because fabric sets most of the feel and most of the cost.
- Jersey
- The plain single knit fabric of almost every t shirt, smooth on the face with small loops on the back. See what jersey fabric is.
- Single jersey
- Another name for jersey, knitted with one set of needles. It is light, stretchy and curls at the cut edge.
- Interlock
- A double knit that is smooth on both sides, thicker and more stable than single jersey.
- Pique
- A knit with a fine honeycomb or waffle texture, used mainly for polo shirts. Compare pique and jersey for polos.
- Rib
- A stretchy knit with vertical ridges, used for necklines, cuffs, tank tops and fitted tees. Common types are 1x1 and 2x2 rib.
- Slub jersey
- Jersey knitted from yarn with thicker and thinner sections, giving an irregular, casual texture.
- Heather
- A mottled color made by mixing fibers of different shades in the yarn, such as heather grey. It is also called melange.
- Combed cotton
- Cotton combed before spinning to remove short fibers, giving a smoother, stronger yarn that pills less. See ring spun versus combed cotton.
- Carded cotton
- Cotton that is cleaned and aligned but not combed. It is more economical and slightly more textured.
- Ring spun cotton
- Yarn spun by twisting fibers tightly around a ring, producing a soft and even yarn.
- Open end yarn
- A faster, more economical spinning method that gives a bulkier, slightly rougher yarn.
- Yarn count
- A number that describes yarn thickness. In the Ne system, a higher number means a finer yarn, so 30s is finer than 20s.
- Long staple cotton
- Cotton with longer fibers, which spin into finer, smoother and stronger yarns. Pima is an extra long staple type. See what pima cotton is.
- Organic cotton
- Cotton grown without synthetic pesticides or fertilizers and traced through a certified chain. See what makes a t shirt organic.
- Recycled cotton
- Cotton fiber recovered from textile waste and spun again, usually blended with other fibers for strength.
- Polyester
- A strong synthetic fiber that dries quickly and resists shrinking, used alone for sports tees and in blends.
- Tri blend
- A mix of cotton, polyester and rayon that feels very soft and drapes lightly. Compare cotton, polyester and tri blend.
- Elastane
- A stretch fiber added in small amounts to give a t shirt extra stretch and recovery.
- Modal
- A soft cellulose fiber made from wood pulp, valued for its smooth, cool feel. See modal, viscose and rayon.
- Viscose
- A cellulose fiber with a silky drape, also called rayon in some markets.
- GSM
- Grams per square meter, the standard measure of fabric weight. See what gsm a t shirt should be.
What do the fit and pattern words mean?
These words describe the shape of a t shirt and how it is measured, graded and approved.
- Regular fit
- A classic cut that is straight through the body, neither tight nor loose.
- Slim fit
- A closer cut through the chest and waist with narrower sleeves.
- Oversized fit
- A deliberately larger cut with extra width and length, usually with dropped shoulders.
- Boxy fit
- A short, wide and square cut that hangs straight from the shoulders. See boxy versus oversized.
- Drop shoulder
- A shoulder seam placed below the natural shoulder line, typical of relaxed and oversized tees.
- Chest width
- The width of the t shirt measured flat from armpit to armpit, often called pit to pit.
- Body length
- The length from the highest point of the shoulder to the hem.
- Pattern
- The set of flat shapes from which the fabric panels of a t shirt are cut.
- Grading
- Scaling a pattern up and down to make every size from one base size.
- Size chart
- The table of measurements for each size that production is checked against.
- Tolerance
- The accepted difference between the measured size and the size chart, usually a small number of millimeters or centimeters.
- Reference garment
- An existing t shirt you send as a model for fit, fabric or construction.
- Tech pack
- The technical document that describes a t shirt for production: measurements, fabric, colors, artwork, labels and packing. See what goes into a tech pack.
What are the parts and trims of a t shirt called?
Every part of a t shirt has a name, and using the right one avoids mistakes in comments and approvals.
- Crew neck
- A round neckline finished with a rib band, the most common t shirt neck.
- V neck
- A neckline cut into a V shape at the front.
- Scoop neck
- A wider, lower round neckline, popular in women's styles.
- Neck rib
- The band of rib fabric sewn around the neckline. Its width and tension decide how flat the neck lies.
- Shoulder tape
- A strip of tape sewn across the shoulders and back neck to stop seams stretching and hide the inside seam.
- Set in sleeve
- A sleeve sewn into a rounded armhole at the shoulder, the standard t shirt sleeve.
- Raglan sleeve
- A sleeve that runs in one piece from the collar to the underarm, with diagonal seams.
- Hem
- The finished bottom edge of the body or sleeve, usually turned and cover stitched.
- Placket
- The opening with buttons at the front neck of a polo shirt.
- Flat knit collar
- The knitted collar of a polo shirt, made to shape on a flat knitting machine.
- Neck label
- The brand label at the back neck, woven, printed or heat transferred.
- Care label
- The label that shows fiber content, care instructions and origin.
- Hang tag
- The paper or card tag attached to a t shirt for retail, often with a barcode and price.
What do the sewing and construction terms mean?
These words describe how the panels of a t shirt are joined and finished.
- Cut and sew
- Making garments by cutting fabric panels from a pattern and sewing them together, as opposed to buying finished blanks.
- Overlock
- A stitch that joins and finishes seam edges at once, used on side and shoulder seams.
- Cover stitch
- A stitch with two or three parallel lines on the face and a looped back, used for hems and neck finishes.
- Twin needle
- Two parallel rows of stitching, a sign of a neat, durable hem or neckline.
- Side seamed
- A t shirt with seams down both sides, which allows shaped fits and a straighter hang.
- Tubular
- A t shirt knitted as a tube with no side seams, an economical construction for basic tees.
- Stitch density
- The number of stitches per inch or centimeter. Higher density gives stronger, neater seams.
- Binding
- A strip of fabric folded over a raw edge to finish it, used on necklines and armholes of tanks.
What do the printing and decoration terms mean?
These words describe how artwork, logos and lettering are added to a t shirt.
- Screen printing
- Pushing ink through a fine mesh screen onto the fabric, one screen per color. See how screen printing works.
- Plastisol ink
- A screen printing ink that sits on top of the fabric, giving bright, opaque colors.
- Water based ink
- A screen printing ink that soaks into the fabric for a soft feel.
- Discharge printing
- A print method that removes the dye from the fabric and replaces it with a new color, leaving almost no feel.
- Digital printing
- Printing artwork directly onto the garment with an inkjet printer, often called DTG, suited to detailed designs.
- DTF transfer
- A design printed on film and heat pressed onto the t shirt. See what DTF printing is.
- Sublimation
- Dye turned into gas by heat and bonded into polyester fabric, used for all over prints. See what sublimation is.
- Embroidery
- A design stitched into the fabric with thread. See embroidery on t shirts.
- Puff print
- A screen print ink that rises when heated, giving a raised, three dimensional effect.
- All over print
- A design that covers the whole t shirt, including seams and sleeves. See how all over print tees are made.
- Print placement
- The position and size of a print on the garment, measured from fixed points such as the collar. See where a logo should sit.
What do the dyeing and finishing terms mean?
These words describe how color and hand feel are added to the fabric or the finished t shirt.
- Piece dyeing
- Dyeing the fabric in rolls before it is cut and sewn, the standard method for most t shirts.
- Garment dyeing
- Dyeing the finished t shirt, which gives a softer hand and a slightly uneven, lived in color.
- Pigment dyeing
- A dyeing method that gives a faded, vintage look that softens further with washing.
- Reactive dye
- A dye that bonds chemically with cotton, giving bright colors with good wash fastness.
- Lab dip
- A small fabric sample dyed to match your color standard and approved before bulk dyeing.
- Enzyme wash
- A treatment that removes surface fibers for a cleaner face, a softer hand and less pilling.
- Softening
- A finishing treatment that gives fabric a smoother or silkier feel.
- Compacting
- A finishing step that stabilizes knitted fabric to reduce shrinkage after washing.
- Dye lot
- A batch of fabric dyed together. Colors can vary slightly between lots, so each is checked against the standard.
What do the quality and testing terms mean?
These words describe how a t shirt is checked against the approved standard.
- AQL
- Acceptable quality level, a sampling method that decides how many pieces to inspect and how many faults are allowed.
- Inline inspection
- Checks made during sewing, so problems are found while they can still be corrected.
- Final inspection
- The check of finished, packed goods before shipment.
- Shrinkage
- The change in size after washing. See why t shirts shrink.
- Spirality
- The twist of a knitted fabric that can make side seams turn toward the front after washing. It is also called torque.
- Pilling
- Small balls of fiber that form on the surface of fabric with wear and rubbing.
- Color fastness
- How well a color resists fading or bleeding in washing, rubbing, light and sweat.
- Approved sample
- The sample you sign off, which becomes the standard for bulk production. It is sometimes called the golden sample.
- Pre-production sample
- A sample made from bulk fabric and trims just before production starts, to confirm everything is ready.
What do the ordering and production terms mean?
These words appear in quotations, order confirmations and production updates.
- MOQ
- Minimum order quantity, the smallest number of pieces per style and color a factory will make. See what MOQ means.
- Private label
- T shirts made to your design and sold under your brand. See private label versus white label.
- White label
- Ready designed garments that several sellers rebrand with their own labels.
- OEM
- Original equipment manufacturing, making a product to the buyer's own design and specification.
- Blank t shirt
- A plain t shirt without decoration, supplied to printers and brands for decorating.
- Size split
- The number of pieces ordered in each size. See how to set size ratios.
- Lead time
- The time from order confirmation to goods ready for shipment. See how long production takes.
- Bulk production
- The production of the full order after the sample is approved.
- Replenishment
- Regular reorders of core styles to keep stock levels steady. See how replenishment programs work.
- Quotation
- The written price offer that states unit prices, quantities, delivery and payment terms.
What do the shipping and customs terms mean?
These words appear on shipping documents and in conversations with your forwarder or customs broker.
- Commercial invoice
- The document that states the goods, their value and the parties to the sale, used for customs clearance.
- Packing list
- The list of what is packed in each carton by style, color and size.
- Carton marks
- The information printed on each carton, such as order number, contents and carton count.
- Certificate of origin
- A document that confirms the country where the goods were made.
- A.TR certificate
- A movement certificate that lets goods of Turkish origin enter the European Union at zero customs duty.
- Proof of origin
- A statement or document showing that goods meet the origin rules of a trade agreement, such as the one between the UK and Türkiye.
- HS code
- The international customs classification number for a product, used to set duty rates.
- Ex works
- A delivery term under which the buyer collects the goods from the seller and arranges everything after that.
- Free on board
- A delivery term under which the seller clears the goods for export and loads them, and the buyer arranges the main transport.
- Delivered at place
- A delivery term under which the seller delivers to the buyer's address and the buyer handles import clearance and duty.
- Delivered duty paid
- A delivery term under which the seller delivers to the buyer's door with import duty and taxes arranged.
- Customs broker
- A licensed agent who clears goods through customs for the importer.
What do the certification terms mean?
These words describe the standards and documents that back claims about fiber, safety and working conditions.
- GOTS
- Global Organic Textile Standard, which covers organic fiber, processing, chemicals and working conditions through the chain.
- OCS
- Organic Content Standard, which verifies the share of organic fiber in a product through the chain.
- GRS
- Global Recycled Standard, which verifies recycled content along with social, environmental and chemical requirements.
- RCS
- Recycled Claim Standard, which verifies the share of recycled fiber in a product.
- OEKO-TEX Standard 100
- A label for textiles tested for substances harmful to health, covering fabric, thread, prints and trims.
- Transaction certificate
- The document that links a specific shipment to a certified chain, needed for organic and recycled claims.
- ISO 9001
- An international standard for quality management systems.
Tell us about the t shirts you want to make
A few lines are enough to start. Attach a tech pack, artwork or photos of a reference tee if you have them.
- We reply by email with questions or a written quotation.
- Your first sample is cut, sewn and decorated in 14 days once the details are fixed.
- Bulk fabric is cut only after you approve that sample.
